Insites AI · Team chat
Insites AI in Slack Beta
Last updated 18 November 2026
Ask Insites AI in Slack, apply changes with a button and get digests in a channel.
What Slack adds
Insites AI is pre-release. This page was written against the build of 14 November 2026 and will be revised at release.
Connect one Slack workspace to your site, and your team can ask Insites AI questions in Slack, approve its changes with a button, and get the daily digest and spending alerts in a channel or a direct message. Only administrators of the site can use it, and each person acts with their own AI role and limits.
Set it up under Integrations > Slack. Only an owner can connect Slack or change its settings.
Connect Slack
- Go to Integrations > Slack. The page shows your workspace as not connected.
- Click Connect to Slack. Slack opens and asks you to allow the Insites AI app in your workspace.
- Check the workspace name at the top right of the Slack page. If it is wrong, switch it there.
- Click Allow. You return to the Slack page, which now shows Connected and the workspace name.
You can connect one workspace to a site.
Choose where it posts
| Setting | What it does |
|---|---|
| Daily Digest | The digest is built once a night and sent here, with the numbers that moved. Choose None to turn it off |
| Spending Alerts | Spending alerts go here when the month's spend reaches a threshold set in Configuration. Choose None to turn them off |
Both settings are under Where It Posts. Each one can go to a person or to a channel:
- A person is listed as Direct message: Name. The digest or alert arrives as a direct message from Insites AI. You do not need a channel for this.
- A channel must be one the app has joined. In Slack, open the channel and type
/invite @Insites AI.
A person appears in the list after they send Insites AI one message in Slack, in a direct message or by mentioning it. They must be an administrator of the site, with the same email address in Slack and in Insites.
If a person or a channel is missing, click Refresh. Then click Save. If a person stops being an administrator, they leave the list and nothing more is sent to them.
Check that it arrives
After you save, click Send Test under Daily Digest or Spending Alerts. Insites AI sends one test message to the saved person or channel straight away. The message says it is a test. It holds none of your data and uses no credits.
The page then shows Test sent to and the destination, or says that the test was not sent and why. Send Test is off until a destination is saved: if you change the list, save first.
Choose who can chat
Set Allowed or Not allowed for each AI role, then click Save.
- Viewer can ask questions. Viewers cannot apply changes in any case.
- Editor can ask questions and apply changes.
- Owner is always allowed.
Slack matches each person to an administrator by the email on their Slack profile. If no administrator has that email, the assistant refuses with Ask your site owner to add you as an administrator. Add the person as an administrator with the same email address.
Ask from Slack
- Mention
@Insites AIin a channel. - Send the app a direct message.
- Type
/insitesfollowed by a question, for example/insites how many orders came in today?
It answers in a thread. Slack cannot draw charts, so the answer gives the figures as text.
While it works
When you mention the app or send it a direct message, it first posts Thinking…. This message changes as the assistant works, in plain words, for example Reading orders..., Checking the contact form... or Writing the answer.... It changes at most once every two seconds.
- If the answer takes 20 seconds or less, it replaces the Thinking… message.
- If the answer takes longer than 20 seconds, it arrives as a new message that mentions you, so Slack notifies you. The Thinking… message is removed.
Direct messages and /insites
Direct messages continue one conversation, so the assistant remembers what you said before. A new conversation starts when 30 minutes pass with no message. A reply inside a thread continues that thread.
When you use /insites, Slack first shows Working on it... to you only. The answer is then posted in the channel and starts with who asked what, for example Sam asked: how many orders came in today?
Approve a change
When the assistant proposes a change, it appears with three buttons: Apply, Discard and Let others apply. Under the buttons, a line says how long you have and who can apply it, for example Apply within 10 minutes. Only Sam can apply it.
Each proposal also lists what it does not do, under the heading Not in this proposal:. Read it before you apply.
What happens when you press Apply or Discard
- The buttons change at once to Applying... or Discarding.... A second press does nothing.
- When it finishes, the result becomes the first line of the proposal, in bold. For example Applied by Sam or Discarded by Sam. Other results are partly applied, put back, or not applied with the reason.
- One new message in the thread says who decided and when. For example Applied by Sam at 15 Jan 2027, 4:00 PM (Perth, UTC+08:00). or Discarded by Sam at 15 Jan 2027, 4:00 PM (Perth, UTC+08:00). Nothing was changed.
The time uses the time zone set in Settings > Localization. If no time zone is set, the time is in UTC and says UTC, for example 15 Jan 2027, 8:00 AM UTC.
After a change is applied, the new message has these buttons:
- Open page opens the changed page on your site. It appears only when the change is to a page.
- Open in History opens the change in History, where you can revert it.
A partial is used inside other pages and has no page of its own. After a change to a partial is applied, the message has only Open in History.
Who can apply
Only the person who asked for the change can apply or discard it. If someone else presses a button, the buttons stay as they were, and only that person sees the reason, in the thread. For example:
- Not applied: this proposal belongs to another administrator. Only the person who asked for it can apply or discard it.
- Not applied: your AI role does not allow changes. Ask a site owner to change your role, or ask the person who asked for this change to apply it.
Let others apply
The person who asked can press Let others apply to hand the proposal to the team. If anyone else presses it, they see Only the person who asked for this change can let others apply it.
After the hand-over:
- The Let others apply button goes, and the line under the buttons reads, for example, Apply within 24 hours. Sam asked. Anyone who can make changes can apply it.
- Any administrator whose AI role allows changes can apply or discard it. A viewer still cannot.
- The proposal can be applied for 24 hours from the hand-over.
- When someone else decides, the new message names both people, for example Applied by Alex at 15 Jan 2027, 4:00 PM (Perth, UTC+08:00) (asked by Sam).
How long a proposal lasts
A proposal can be applied for 10 minutes. If you press a button after that, the first line of the proposal reads This proposal has expired. Ask for the change again. and the buttons go. To make the change, ask the assistant again.
If the page changed after the proposal
When you press Apply, Insites checks that the content has not changed since the proposal was made. For a page, partial or layout it compares the content. For a record it compares the fields the change sets. If someone changed it in the meantime, nothing is changed, and the proposal reads, for example, Not applied: this page changed after the proposal was made. Ask for the change again. Ask again, so the new proposal starts from the current content.
Rate an answer
The first answer in a thread has two buttons: Helpful and Not helpful. The message that says a change was applied has them too.
- Helpful saves your rating, and the buttons change to Thanks, noted.
- Not helpful saves your rating at once, and the buttons change to Thanks, noted. A form then asks What was wrong? The answer is optional. Click Send to add it, or Skip.
Each person has one rating per answer. Ratings help the assistant learn, the same way as the thumbs in the admin.
Post to Slack from an automation
An automation can include a Post to Slack action. It needs the Slack channel id, such as C0123ABCD, not the channel name, and Slack must be connected first. See How automations work.
Cost
A question in Slack costs the same as in the admin, and an applied change costs 3 credits. If the site has no credits left, Slack says so. See Credits, limits and pricing.
Disconnect Slack
- Go to Integrations > Slack and click Disconnect.
- Click Yes, disconnect, or Keep connected to cancel.
Disconnecting removes the app from the workspace and deletes its stored token. The digest and alerts stop posting. People can still use Insites AI in the admin.